The 10L high shear homogenizer emulsifier is a device that integrates functions such as vacuum defoaming, wall scraping and stirring, high shear homogenizer emulsification, heating, cooling, and electrical control. It is used for the production of medium and high-end paste and dense products. It is specially designed and manufactured for small batch production of cream, honey, lotion and other emulsified products.

10L high cut homogeneous emulsification unit is specially designed and manufactured for small batch production of cream, honey, lotion and other emulsified products. The machine is beautiful in shape, small in size, light in weight, and all parts in contact with materials are made of stainless steel (note: 316L for medical use); Smooth circular arcs are used at all connection points inside the pot, and the bottom and pouring of materials ensure that there is no residue inside the pot; The high shear homogenizer head is designed with a claw type dual bite structure for the stator and rotor. The material is sucked in from both the upper and lower parts of the stator and rotor, increasing the shear probability exponentially while avoiding the problem of blind spots in the upper part of the material. Suitable for fine emulsification, high-quality dispersion, and efficient mixing. Scraping and mixing materials roll without dead corners, truly meeting GMP standards.
After completing all the preparation work, turn on the power and proceed with the work according to the prescribed requirements. The operating components include the main pot mixing system, main pot homogenization system, main pot lifting system, auxiliary pot mixing system, and vacuum pump system. Control can be achieved through buttons on the panel, which can control the illumination and extinguishing of the lighting, the operation of the main pot mixing, the homogenization of the main pot, the mixing of the auxiliary pot, the operation of the vacuum pump, and the heating of the main and auxiliary pots.
① Turn on the power → ② Add ingredients to the oil-water pot → ③ Close the lid of the oil-water pot → ④ Heat and stir the oil-water pot → ⑤ Close the lid of the homogenization pot, close other valves on the lid, and open the vacuum valve for vacuuming (suction) → ⑥ Heat the homogenization pot (temperature adjustable) → ⑦ Stop heating the homogenized and stirred emulsified materials (time is up) → ⑧ Open the discharge valve again for discharging → ⑨ (After cleaning, lift the lid of the pot to dump and drain before closing the lid) → ⑩ Cycle the previous work.